Charging with GreenWay mobile application

  1. Log in to the mobile application. If you do not have our mobile app yet, you can download it by scanning the QR code.
  1. Click on the location you are at.
  1. In the location details click „Charge“ next to your connector. If there are several chargers next to each other on the site, follow their serial number, marked in the application as „Charge Point: 01“ and on the charger as „#1“ and so on.
  1. Connect the vehicle to the charger.
  1. After you start charging you will be able to see the charging progress in the app – time and charged energy.
    Charger display and mobile phone display during the charging look as follows:

Remember that after reaching ca 80% of the battery capacity charging is slowed down and therefore less efficient.

  1. To stop charging, click „Stop“.
  1. Disconnect the vehicle (if the vehicle locks the connector inside the vehicle, unlock the vehicle or confirm the disconnection of the connector directly in the vehicle) and put the connector back in place.

Charging with GreenWay charging card

  1. Click on the charger display.
  1. Select the RFID option.
  1. Hold the charging card over the reader below the charger display.
  1. Connect the Type 2 connector to the vehicle, then to the charger.
  1. Charging will start automatically.

Remember that after reaching ca 80% of the battery capacity charging is slowed down and therefore less efficient.

  1. To stop charging, hold the charging card over the reader below the charger display.
  1. Disconnect the connector from the vehicle, then from the charger.

Charging with Driver Zone (GreenWay web)

  1. Make sure that the vehicle is not connected to the charger.
  1. Log in to the Driver Zone at https://driver.greenway.sk/ (if you do not have a registration yet, first go to “Register here”).
  1. Select the location on the map by clicking or searching.
  1. Select the Type 2 connector. If there are several chargers next to each other on the site, follow their serial number, marked in the application as „Charging point: 01“ and on the charger as „#1“ and so on.

  1. Connect the Type 2 connector to the vehicle.
  1. Click on „Start charging“.
  1. After you start charging you will be able to see on the charger display, as well as in the Driver Zone, the charging progress – time and charged energy.

Driver Zone (web) during the charging looks as follows:

Remember that after reaching ca 80% of the battery capacity charging is slowed down and therefore less efficient.

  1. To stop charging, click „Stop charging“.
  1. Disconnect the connector from the vehicle (if the vehicle locks the connector inside the vehicle, unlock the vehicle or confirm the disconnection of the connector directly in the vehicle), then from the charger.